Results 1 to 3 of 3
  1. #1
    Join Date
    May 2010

    Default Router Guide Rail ID

    On last weekends TOH Tommy and Norm were building some cabinets. I don't know the project or episode. Tommy was using a guide rail with a guide for his circular saw to rip the panels, a guide to cut the dados and another to drill the shelf pin holes with a small router. Anyone know the name and mfgr of this guide and attachment system?

  2. #2
    Join Date
    Jun 2007
    Fayette County, Ohio

    Default Re: Router Guide Rail ID

    Festool is what he uses with a Festool plunge saw and router, not sure about the shelf pin jig.

    Be sure you live your life, because you are a long time dead.-Scottish Proverb

  3. #3
    Join Date
    Aug 2007

    Default Re: Router Guide Rail ID

    A simple shelf pin jig can be made from a strip of peg board. Holes are evenly spaced and ready to go. Install a stop collar on your brad point drill bit and you're good to go.
    Come to Hidden Content for all your DIY needs

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts