+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    May 2010

    Default Fault in hot water tub

    When I woke up this morning, I turned on the bathtub faucet, but once I switched it over to the hot side, water stopped coming out (as if I was putting it into the off position).

    I just recently changed my showerhead with one of those that has a 6ft cord on it...not sure if that is related.

  2. #2
    Join Date
    May 2010

    Default Re: Fault in hot water tub

    You may have a pressure-balanced type of shower valve, and they can be stuck in the "cold" position. You will need to turn off the water main, and then take it apart for inspection, lube, or possible new cartridge.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts