+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2008
    Posts
    2

    Default pull-down attic stairs

    Our folding attic stairs worked perfectly for a while, then developed a problem. When pulled down, it's as if the spring has too much tension on it, so the bottom section does not rest on the floor. The spring seems to be in the proper place, resting on the top of the spring carrier. They are not cut too short, and we can "get around" the problem by hanging a bucket of water on the stairs to weigh it down. But of course we'd like to solve the problem permanently. Any ideas about what may have happened?

  2. #2
    Join Date
    Jan 2008
    Posts
    731

    Default Re: pull-down attic stairs

    folding hinge sprung or bent or loose? truss uplift? wood dried out/shrunk? if you put a square of plywood on the floor do they reach? or maybe they're too long? maybe took on moisture and wood swelled/froze? ceiling sag? you sure they are framed correctly and still secure and not warped or out of square?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •