+ Reply to Thread
Results 1 to 3 of 3

Hybrid View

  1. #1
    Join Date
    Nov 2008
    Posts
    1

    Default basement support beam

    Hello All,

    We have steel basement beam supports (from basement floor to ceiling) in our basement and the previous owner had welded pieces of 'L' shaped steel on half of them (for shelving - used 2x8's stretched across). We want to remove these 'L' brackets, but I'm not a welder and don't have a clue how to remove. Can these be cut off with a grinder or sawed off? Would I harm the beam if I did that? We're planning on closing in the basement, as well, we fear our kids will run around in the basement and get clotheslined until then, so at this point it's a safety issue. Any thoughts or help would be appreciated.

    thank you,
    Chad
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	photo.jpg 
Views:	308 
Size:	9.6 KB 
ID:	1845  

  2. #2
    Join Date
    Jun 2007
    Location
    Coventry, RI
    Posts
    340

    Default Re: basement support beam

    You should be able to cut them off with a grinder or reciprocating saw (sawzall) with a metal cutting blade. Grinding will be faster but you need to be careful of the sparks that they don't cause anything to catch fire. Just be sure to cut the welds and not into the posts. Afterward you should prime and paint to prevent any rust from developing. If you aren't comfortable cutting to close to the post you could just cut off the angle iron that is in the horizontal position. Hope this helps you out.

    Mike

  3. #3
    Join Date
    Aug 2007
    Location
    The Great White North
    Posts
    4,045

    Default Re: basement support beam

    Yep .... definitley a saftey hazard with kids running around..... getting clotheslined is one thing but those corners are deadly.

    To add to Sabo's post .... if you use a sawzall you wouldn't be cutting the welds on the angle iron welded to the posts .... that will be the use for the grinder.

    Consentrate on the weld bead and toward the angle iron as a margine of error.
    You won't need to grind the welds completely off just to the point they are down enough to use a hammer on the back side of the angle iron to break it free.

    Make sure to wear work gloves .... definitely wear eye protection maybe even a face shield and ear plugs while grinding.
    "" an ounce of perception -- a pound of obscure "
    - Rush

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •