+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2008

    Default outlet covers wont fit

    What can you do if your outlets are to deep in the wall and you cant put outlet covers on??

  2. #2
    Join Date
    Jun 2007
    Fayette County, Ohio

    Default Re: outlet covers wont fit

    First pull the outlets out and tape around them with electrical tape to insulate the connecting screws. Then use washers on the mounting screws to space the outlet out where you need it if not to far in. If very deep, say ", use a box extender you can pick up at most hardware stores.
    Last edited by JLMCDANIEL; 11-23-2008 at 03:35 PM.
    Be sure you live your life, because you are a long time dead.-Scottish Proverb

  3. #3
    Join Date
    Jan 2008

    Default Re: outlet covers wont fit

    how short are you from being able to install them? get some longer cover screws. you can get them at the hardware store, you might need some insulating spacers or washers to help you level them out. if the gap is more than 1/8" then you should probably remove the device and extend the box first.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts