Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2009

    Default Water Heater Exhaust Vent

    Ok, this past weekend, I bumped the vent pipe for my HW Heater and burned the back of my hand. I was surprised how hot this was.

    The only way I know how to "insulate" the pipe is to install a double wall pipe, thus providing the air gap. I really don't want to mess with the mortar and the chimney. I don't know if other options like a foil wrap are feasible due to the high temps.



  2. #2
    Join Date
    Aug 2007
    The Great White North

    Default Re: Water Heater Exhaust Vent

    If it's the exposed part of the exhaust you are talking about --- the cheapest and simplest method would be to install a second larger pipe ( with some type of standoff ) over top --- becomes a heat shield .
    "" an ounce of perception -- a pound of obscure "
    - Rush

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts