I'm having trouble with a GFCI that is outside and by a lake. The old one got tripped somehow and would not reset so I went to replace it with a new one. I got it wired in, black wire to **** screw and white wire to silver screw and the ground to the green gound screw. Turned the power on to it and got nothing. The outlet would not trip to test or reset. I tried a another outlet thinking maybe that one was bad and got the same problem. This outlet has a amber light on it and the other night I was down by the lake and saw the amber light was on even though the power to that outlet was off. There is also a light that runs through the outlet, to protect it, and when I wire it direct to the light, bypassing the outlet, the light works fine.
Any ideas would great! Thanks!