+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Hybrid View

  1. #1
    Join Date
    Aug 2009
    Location
    Rochester NY
    Posts
    33

    Default Leaking shower - how to remove stem??

    I have an old shower (see pictures) that leaks. I am going to repair some tile that I've removed, but before I do that I want to fix the leak. I've spent the past 3 days getting the handles and covers removed and cleaned (CLR) and polished with chrome polish. Then I tried to remove the stem, without luck. The stem nut comes out ok, but the stem will not budge. Is the something different in a shower stem as compared to a kitchen or bathroom sink stem??

    If the above image doesn't work, try:

    http://picasaweb.google.com/11035001...461720/Shower#

  2. #2
    Join Date
    Aug 2009
    Location
    Rochester NY
    Posts
    33

    Default Re: Leaking shower - how to remove stem??

    [QUOTE=nylicens;147404]The stem nut comes out ok, but the stem will not budge.

    I meant to add "other than the normal on-off rotation of the stem itself"

    And since I'm here, how does one remove the spigot? There is no set screw so it seems to be screwed in, but I wasn't able to budge that either (though I didn't want to take a chance on crushing it with too much pressure)

  3. #3
    Join Date
    Aug 2007
    Posts
    6,616

    Default Re: Leaking shower - how to remove stem??

    Sometimes old parts become seized and won't come apart. I would recommend leaving the spout alone, clean it in place. Too much force applied can break the parts inside the wall, so unless you're prepared for a total valve replacement ...

    The stem will probably back out of it's moorings. With the nut removed, put the handle back on and try turning it to the left. You may have to work it back and forth as you break it through the corrosion and mineral build up. Again, be prepared for total replacement if things should break.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

  4. #4
    Join Date
    Aug 2009
    Location
    Rochester NY
    Posts
    33

    Default Re: Leaking shower - how to remove stem??

    [QUOTE=A. Spruce;147725] I would recommend leaving the spout alone, clean it in place.

    OK

    ...put the handle back on and....

    DOH!

    And I was worried that the pliers would gum up the ridges for the handle. :-)

  5. #5
    Join Date
    Aug 2007
    Posts
    6,616

    Default Re: Leaking shower - how to remove stem??

    Um, yeah, that probably wouldn't be a good thing ...
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

  6. #6
    Join Date
    Dec 2009
    Posts
    40

    Default Re: Leaking shower - how to remove stem??

    when things are old,you have 2 choices.....either force it and it works or replace everything..... prepare for the worst and hope for the the best.

  7. #7
    Join Date
    Mar 2010
    Location
    Santa Monica
    Posts
    4

    Default Re: Leaking shower - how to remove stem??

    no sure never had that problem.

  8. #8
    Join Date
    Aug 2009
    Location
    Rochester NY
    Posts
    33

    Thumbs up Re: Leaking shower - how to remove stem??

    Success!

    I used a tile cutter to enlarge the tile opening, and with 5 days of Blaster soaking and a mighty big adjustable wrench got the stems (#1 in the picture) removed and was able to change the washers out. The hot still requires a bit of excessive pressure to shut off, so I guess I'll have to find a valve seat regrinding tool, because I was unable to get the valve seat out. It has oddball valve seat tool notches which are semi-visible in the picture I uploaded, as is the roughness in the seat itself on the bottom edge:

    http://picasaweb.google.com/11035001...461720/Shower#

  9. #9
    Join Date
    Aug 2009
    Location
    Rochester NY
    Posts
    33

    Question Re: Leaking shower - how to remove stem??

    Forgot to mention that what seems to be the shower diverter, is not. It is plumbed in parallel with the tub faucets. Thus you can run the shower without touching the tub faucets. Is this something unusual? Everyone I mention this to, thinks it is very unusual.

  10. #10
    Join Date
    Aug 2007
    Posts
    6,616

    Default Re: Leaking shower - how to remove stem??

    It didn't used to be unusual. Basically you set the temp with the normal mixing valves then are able to turn the whole thing on/off with the "master" valve. It's primary purpose is to temporarily control the water flow when necessary, as opposed to set it once and forever more have the perfect shower setting.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •