Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2008

    Default Cooling a finished 3rd room

    I have a finished 3rd floor room in my 1925 brick home, there is a uninsulatted attic above this room and the house has a slate roof. I have central air with a separate duct from the a/c and gas forced air unit that is in the basement, this room is boiling in the summer and freezing in the winter. I am in the need for a new furnace for the whole house, the a/c is new,would zoning the new unit help? ( would the compressor unit outside run constantly)? I don't want to use portable window unit. Any help would be appriciated. Thank you

  2. #2
    Join Date
    Dec 2007

    Default Re: Cooling a finished 3rd room

    It sounds like insulation might be the first thing to look at.
    Zone controls for multiple levels is a good thing to help with balancing the temperature on the different levels.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts