Re: Painting steel entry door with oil based paint
It sounds like you are trying to put it on to thick. When you paint you should just dip the very tips of th bristles in the paint and work it into the surface of whatever you are painting. If the brush looks like the paint is half way up the bristles after a couple of minutes you are loading to much paint. You get much better results with 2 thin coats than with one thick coat. By the way you can get the same results with latex if you slather it on.
Last edited by JLMCDANIEL; 07-28-2008 at 11:22 PM.
Be sure you live your life, because you are a long time dead.-Scottish Proverb