Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2008

    Default Decorative end on 6X6 post

    I have to replace a 6X6 post on a wood fence and it has a point on the end of the post. How do you cut the end to be a point? The cut starts at about 6 1/2 inches from the top and tapers to a point at the end. This is only decorative but I would like to match all the other post.

  2. #2
    Join Date
    Jun 2007
    Fayette County, Ohio

    Default Re: Decorative end on 6X6 post

    That seems like an awfully sharp point for a fence post. What I usually do is draw a line around the post, use a circular saw or miter saw set at 45 degrees, and cut on all four sides at the line.
    Be sure you live your life, because you are a long time dead.-Scottish Proverb

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts