+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2010
    Posts
    3

    Question Dry-fitting PVC Pipe

    Is there any product you can put on PVC pipe during dry-fitting to allow tighter and easier assembly and disassembly that will not harm the final glueing? Too often it is hard to get an accurate measurement during dry-fitting if the pieces don't fit entirely in place, but if they do it is then very difficult to get them appart for final glueing. I have asked several plumbers and home improvement stores for advice, but no one seems to know of any appropriate product. Thanks for any information anyone can provide.

  2. #2
    Join Date
    Feb 2010
    Location
    South*East
    Posts
    1,208

    Default Re: Dry-fitting PVC Pipe

    The simple answer is no. Measure twice, cut once, then use primer then glue.

    John

  3. #3
    Join Date
    Jan 2010
    Posts
    163

    Default Re: Dry-fitting PVC Pipe

    Learn to do what plumbers are taught: measure from centerline to centerline of whatever fittings you're working with. This C-C measurement is the gross length of pipe, so you then subtract the "fitting allowance" for each fitting.

    The centerline of a 90-degree bend, for example,is where the two centerlines of the pipes would meet within the body of the 90. The fitting allowance is the distance from that point to the point where the cut end of the pipe would be located in the socket of the fitting. On a 3" PVC drainage 90, this is about 3".

    So, if the C-C measurement between two 90's is 25", you would subtract the two fitting allowances of 3" each for a final cutting measurement of 19"

    As an aid to rotating the fittings after the glue has been applied, always sc**** a small chamfer on the cut end of the pipe--this is because if you leave the cut end as comes from the saw or pipe cutter, the sharp corner of the pipe sc****s and pushes the glue ahead of itself and the joint thereby loses a lot of the lubricating effect that the glue provides just before it begins to set up.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •