I'm replacing old toilet with a new one (ToTo Drake). Specs call for 12" rough-in. The center of drain is 11" from wall, plus 1/4" for tile which will be installed later. Is there enough wiggle room to install this type of toilet. I rate this toilet very high, and would very much like to use it.
Re: 11" Rough-in
Never mind, answered my own dilemma. Bought a ToTo Drake base at local plumbing store, the one I wanted. Took it home, set it over the bolts and had about 3/4" to spare. Problem solved. Sometimes you have to get in the trenches to get what you want. Thanks for?