+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    May 2008
    Santa Cruz, CA

    Default Another Backer Board Question

    After exposing the 2x4's with sheetrock removal, I checked for squareness. Some 2x4's stick out causing the level to teter toter. To make them all level and square do I brake out the sander or plane to make them even across? If I install the backer board chances are it won't be level, bad for tile. I'm sure someone has run into this before. Any suggestions?

  2. #2
    Join Date
    Feb 2008
    Memphis, not Egypt

    Default Re: Another Backer Board Question

    You need a straight edge and a table saw or some skill. Rip strips according to the desired thicknes and firthe wall to square and flat.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts