+ Reply to Thread
Results 1 to 2 of 2

Thread: Fustat

  1. #1

    Default Fustat

    By Mistake I Installed A 20 Amp Fustat Edison Adapter Into A Circuit Which Should Have Been A 30 Am Adapter (#10 Wire) Any Easy Way Of Removing The Adapter Without Breaking The Porcelin Fuse Holder So That I Can Put The Correct Adapter In. This in in a plug fuse panel which my insurance co says i have to modify to fustats.

  2. #2
    Join Date
    Jun 2007
    Fayette County, Ohio

    Default Re: Fustat

    I have never tried to remove one but is you can get a piece of dowl that fits snugly into the adapter you may be able to uscreww it. Best to have electric off while you work.

    Be sure you live your life, because you are a long time dead.-Scottish Proverb

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts