+ Reply to Thread
Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Jun 2008
    Posts
    1

    Default Possibly black mold in my window a/c unit


    My house was built in 1924. I bought it in summer '03 and the following summer I bought a new window a/c. Every summer I'd put the unit in the window and use it and take it out at the end of the summer - except for last year. Instead of taking the unit out, inside the house I put plastic over the front of the unit and plastic heat shrink film over the entire window including the unit. The outside was exposed to the elements. Tonight I decided it was time to use the a/c. I pulled off the plastic and cleaned the filter on it. But when I looked through the vents there was black stuff on some parts of the styrofoam inside. I was able to remove a vent and there was black stuff on the back of it (see photo). How do I know if this is black mold? Is it not safe to use this a/c if it is mold? I'm in Iowa and it is humid. I really don't want to get rid of it, it is a necessary narrow width 12,000 BTU unit, and I don't see that Sears has a comparable one in their current lineup. Any help is greatly appreciated.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	060508193958.jpg 
Views:	581 
Size:	13.2 KB 
ID:	1183  
    Last edited by pffreese; 06-05-2008 at 09:59 PM. Reason: necessary info added

  2. #2
    Join Date
    May 2008
    Posts
    13

    Default Re: Possibly black mold in my window a/c unit

    Its a window unit,I would get some rubber gloves and bleach water and clean it.
    One could even take the entire unit outside and hose it down with fungicide/germacide and let it dry, then put it back.
    I am not telling you what to do, as I am not there, and BM is a very ugly word in my business, but I am telling you what I would do, at my own home.
    By the way, did you know that all of us have been exposed to 'black mold' our entire lives? Its NOT new. I grew up eating black mold on lead paint crackers, with mercury topping. (not recomended).
    Again, not proffesional advise, but I dont get all out of sorts over mold.(unless its in my customers house)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •