Hello. I have a city loft with exposed conduit and ducting. I recently decided to replace my two overhead bedroom lights with ceiling fans. The problem came when I went to install them and realized the fans have a decorative cover plate that is made to mount flush to the ceiling to cover the junction box, etc. My junction box has 1/2" conduit running out each side of it that runs through the rest of the loft and ties into the rest of the lighting. Therefore, I am unable to fit the cover plate flush to the wood beam ceiling because the conduit is in the way. Is there a special adapter/cover made for this situation or would using a dremel or similar tool to notch out openings on the cover plate for the conduit be best?