+ Reply to Thread
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Join Date
    Feb 2012
    Posts
    92

    Default Re: Sand/Grit from hot water faucits

    You want the real solution is simple you need a whole home carbon filtration back to back with a softener the problem will be solved as another person stated as the sediment/sand builds up in the bottom of the hot water and you turn it on it swirls around and out of the hot tap as to were the cold the sand sediment does not contain as much and is not as noticeable.


    Orem Benjamin Plumbing
    153 N Garden Park Orem UT, Orem, UT 84057
    (801) 960-1565 ‎ http://www.benfranklinplumbingorem.com

  2. #12
    Join Date
    May 2008
    Location
    Pacific Northwet
    Posts
    1,356

    Default Re: Sand/Grit from hot water faucits

    Have you checked for a leak? Turn off all faucets, then look at the water meter. Look closely at the little red triangle: if it's turning at all, you have a leak.

    As the water flows across the leak, it can actually create a suction (venturi effect), drawing in sediment. Yes, even on a pressurized line.
    The "Senior Member" designation under my name doesn't mean I know a lot, it just means I talk a lot.I've been a DIYer since I was 12 (thanks, Dad!). I have read several books on various home improvement topics. I do not have any current code books I can refer to. I was an apprentice plumber for two years.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •