This is something I find strange ........
Originally Posted by eaglesrfree
PVC piping indicates to me you have a higher efficient type of combustion equipment.
Combined with the 90's----- a section of this piping that is horizontally flat ---- all inside the cold zone of the attic doesn't sound right to me.
Where is the exit point of this flue in relation to the ridge and gable vents ?
Most of the moisture is around chimney but there is moisture everywhere.
It has a rdige vent and I put a vent in one of the gable ends.
Don't know what to do
Remember--- the exhaust from the flue contains a large amount of moisture as a byproduct of combustion. Depending on the proximity of the flue , the exhaust my be getting blown or sucked in by the ridge and/or gable vents.
"" an ounce of perception -- a pound of obscure "