I just recently finish my 14 X 14 Vaulted ceiling sun room. I used tongue and grove ship lap 3/4" Birch. It turned out wonderful. I posted a question on how I could mate 3 pieces of crown molding together at one corner. No one had a answewr so I put on my thinking cap on. So I glued three pieces of scrap birch together. The I cut the top that meets the ceiling at 12 degrees to match the vaulted ceiling. The cut the bottom square. I then cut the face at a 45 degree angle. Now I have a way to meet the three pieces of crown at the corner. Enclosed is my pictures. I also made a simular piece for the peek because the uneven surface of the boards made it impossible to get a goo 6degree miter joint.[ATTACH]_pack[/ATTACH]

Click image for larger version. 

Name:	DSC00184.jpg 
Views:	106 
Size:	11.1 KB 
ID:	1031

Click image for larger version. 

Name:	DSC00185.jpg 
Views:	98 
Size:	10.9 KB 
ID:	1032

Click image for larger version. 

Name:	DSC00186.jpg 
Views:	95 
Size:	8.9 KB 
ID:	1033