Results 1 to 4 of 4
  1. #1
    Join Date
    Apr 2008

    Question Help in the bathroom !

    I pulled out my old vanity and there is a heat vent underneath. There was a makeshift wooden duct directing the heat to the front of the vanity and a hole cut in the kick plate. The box is broken and too high for the new vanity (5 inch clearance). It looks like this: "[IMG]value[/IMG]".

    What can I use to create a duct to direct the heat?
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	GEDC0087_1.JPG 
Views:	189 
Size:	21.4 KB 
ID:	962   Click image for larger version. 

Name:	GEDC0086_1.JPG 
Views:	192 
Size:	14.2 KB 
ID:	963  

  2. #2
    Join Date
    Nov 2007
    Sand Springs, OK

    Default Re: Help in the bathroom !

    You can either build another one with smaller dimensions or look for a metal one.

    I have the same configuration in my guest bath and under the kitchen sink.
    Debby in Oklahoma

  3. #3
    Join Date
    Apr 2008
    Binghamton, NY

    Default Re: Help in the bathroom !

    I would build one personally, seems like a simple enough task.
    New homeowner in need of Hidden Content assistance.

  4. #4
    Join Date
    Jun 2007
    Fayette County, Ohio

    Default Re: Help in the bathroom !

    That's pretty common in remodels. As small as that vanity is you may be able to just cut a vent in the front kick plate.
    Be sure you live your life, because you are a long time dead.-Scottish Proverb

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts