+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2008
    Location
    Long Island
    Posts
    1

    Default Cast Iron Soil Pipe to PVC

    I've just cut out a damaged section of Cast Iron soil pipe to replace it with PVC. The pipe measures just under 4 1/4 in diameter, so I think it's nom. 4" pipe. I'm going to use Fernco rubber couplkings, but the size is a bit large for the Iron pipe -- should I sleeve it with something first? My mason mentioned that Green PVC Drain pipe will slide over this pipe -- have you heard of using this in this way?

  2. #2
    Join Date
    Aug 2007
    Posts
    1,131

    Default Re: Cast Iron Soil Pipe to PVC

    There are couplings available for this.

    http://www.fernco.com/1056.asp

  3. #3
    Join Date
    Jun 2007
    Location
    Shamokin, Pa.
    Posts
    645

    Default Re: Cast Iron Soil Pipe to PVC

    If the fernco still has room to be tightened [the steel banding], everything should be all right.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •