+ Reply to Thread
Results 1 to 4 of 4
  1. #1

    Default Glass Bock Installation

    How do we install glass block partiation wall 5 block high 8 block long?

  2. #2
    Join Date
    Nov 2007
    Location
    Sand Springs, OK
    Posts
    467

    Default Re: Glass Bock Installation

    make sure the opening is level and square then you use mortar that is rated for glass block. They even have spacers specifically for glass block to keep the grout lines straight and pretty. I saw an article in ATOH where Tom says it could be stacked with silicone too but I think there's an insert that goes in the groove before hand. The article was about hanging a towel warmer in a glass block wall.

    or you could investigate a system like this. http://www.ibpglassblock.com/
    Debby in Oklahoma

  3. #3
    Join Date
    Aug 2007
    Location
    The Great White North
    Posts
    4,045

    Default Re: Glass Bock Installation


  4. #4
    Join Date
    Jun 2007
    Location
    Fayette County, Ohio
    Posts
    5,789

    Default Re: Glass Bock Installation

    Be sure you live your life, because you are a long time dead.-Scottish Proverb

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •