+ Reply to Thread
Results 1 to 4 of 4

Hybrid View

  1. #1

    Default Glass Bock Installation

    How do we install glass block partiation wall 5 block high 8 block long?

  2. #2
    Join Date
    Nov 2007
    Sand Springs, OK

    Default Re: Glass Bock Installation

    make sure the opening is level and square then you use mortar that is rated for glass block. They even have spacers specifically for glass block to keep the grout lines straight and pretty. I saw an article in ATOH where Tom says it could be stacked with silicone too but I think there's an insert that goes in the groove before hand. The article was about hanging a towel warmer in a glass block wall.

    or you could investigate a system like this. http://www.ibpglassblock.com/
    Debby in Oklahoma

  3. #3
    Join Date
    Aug 2007
    The Great White North

    Default Re: Glass Bock Installation

  4. #4
    Join Date
    Jun 2007
    Fayette County, Ohio

    Default Re: Glass Bock Installation

    Be sure you live your life, because you are a long time dead.-Scottish Proverb

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts