+ Reply to Thread
Results 1 to 3 of 3
  1. #1

    Exclamation Custom Molding Machine?

    I recently saw on TOH when they were milling custom trim and molding after getting a couple of blades cut with the profile. Can anyone tell me where you can buy these machines or what they are called? Or is it going to be cheaper for me to go to a lumber yard and have them cut it themselves (I have a whole house to do in trim about 2500 sqft) thanks for help

  2. #2
    Join Date
    Jun 2007
    Location
    Fayette County, Ohio
    Posts
    5,558

    Default Re: Custom Molding Machine?

    Here's the machine they used http://www.williamsnhussey.com/Merch...Store_Code=WNH

    There are other brands like http://www.woodmastertools.com/s/molding.cfm

    Set up and run charges can be rather high in some custom shops if you need custom trim. If it's standard molding the machine will probably not pay for it's self on just this one job.
    Jack
    Be sure you live your life, because you are a long time dead.-Scottish Proverb

  3. #3
    Join Date
    Jun 2007
    Location
    Upstate NY
    Posts
    34

    Default Re: Custom Molding Machine?

    W & H will cost about $2,000. Unless you add on options.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •