+ Reply to Thread
Results 1 to 2 of 2

Thread: Help! .......

Hybrid View

  1. #1
    Join Date
    Dec 2007

    Default Help! .......

    I am in the beginning stages of grouting my new backsplash. I used tumbled stone for it's character and "hole" appearence. Reading up before grouting, I did the recommended sealing the stone twice before grouting.

    The only problem is that it is impossible not to fill up the holes with grout in the tile that add so much character. I've tried precision placing the grout but it is so tedious and I end up covering most of the tile anyway. The only other thing that I can think of to protect the tile is to place tape over it - but I know that won't work...

    Any ideas?... please?


  2. #2
    Join Date
    Aug 2007

    Default Re: Help! .......

    I think you would have the best results by using a grout bag and something to press the grout into the joint. What you use to press depends on the spacing you went with. Careful sponging when you are done should clean up the tiles and "finish" the grout.

    Post a pic if you can. I am finishing a backsplash myself and would be interested in how yours looks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts