+ Reply to Thread
Results 1 to 10 of 11

Hybrid View

  1. #1
    Join Date
    Jan 2008
    Posts
    1

    Default Washer drain problem

    I recently purches my house which was built in the 50's. The previous home owner had installed a drain for the washing machine which flowed down approx 2ft then into a p trap then t'd into the drain for the tub sink next to it. The problem the previous home owner ran into was that it overflowed. Any suggestions on remedying this situation?

  2. #2
    Join Date
    Jan 2008
    Posts
    61

    Default Re: Washer drain problem

    remove the tee and install correct sanitary fittings, correcting pitch. as you describe it you have two p-traps in-line from the machine and creating a venting problem. each fixture should have its own single p-trap no additional traps between it (a fixture) and the main.

    easiest solution would be to tear out this former owner's DIY project and have the machine discharge to the laundry sink making sure the hose has a dip before it is hung from the sink edge.

  3. #3
    Join Date
    Nov 2007
    Location
    Sand Springs, OK
    Posts
    467

    Default Re: Washer drain problem

    I would replace that T with a y joint so the water doesn't have an opportunity to back up the other direction and saturate the drain system.

    My washer has the all in one box in the wall and there isn't a p trap in it at all it. I have all the plumbing diagrams for the house and it's a y connection to the main drain.
    Debby in Oklahoma

  4. #4
    Join Date
    Feb 2008
    Location
    Memphis, not Egypt
    Posts
    183

    Default Re: Washer drain problem

    Debby you need to stop before you hurt some body. Every fixure must be trapped and vented. I don't believe you.

  5. #5
    Join Date
    Nov 2007
    Location
    Sand Springs, OK
    Posts
    467

    Default Re: Washer drain problem

    Quote Originally Posted by williams1492 View Post
    Well Mr Arrogant i.m. plummin, we don't believe YOU.

    Don't you know it's extremely impolite and insulting to directly criticize people like that??

    Maybe you just don't have any respect for women.

    Debby's providing her input & it deserves respect.
    That's okay.

    I live by 4 Toltec Agreements,
    ~Don't take anything personally is the most important,
    ~Don't make assumptions,
    ~Do your best
    ~Be impeccable in your word.

    My house is probably an exception to the rule, so I relayed my experience. My house certainly has a lot of quirks, and the laundry drain is vented it just doesn't have a p trap. lol, actually, I have 2 laundry areas too so that makes my house really really goofy. There's one in the garage, where I suspect it was originally designed to go and then one in the mud room off the garage. gdogandbj certainly doesn't have to follow my suggestion.
    Debby in Oklahoma

  6. #6
    Join Date
    Feb 2008
    Location
    Memphis, not Egypt
    Posts
    183

    Default Re: Washer drain problem

    Look I don't want to start a fight with anyone especially women. I love and respect women. For confidentiality and security I will not expound the details my respect for women.

    But you look here you two and anyone else for that matter I have first hand experience with half wits and crooks that feel complex sanitary issues are for anyolddoityourselfer and the when it is a royal useless mess they have passed the problem along and evenmade money of stuff they oughta be horse dragged for. Some times its not that bad i.e. "Where is that smell coming from" or "This water tastes funny." and sometimes its somone or even some people are killed i.e. " Where'd that dude go? He was right here." or " This water tastes funny".

    Take a look at any code book for plumbing and you will find that what I have stated is correct. Our area uses the International Plumbing Code (IPC) and I consider it to be rather simplified and liberal in application. And in the first rules of the section concerning vents and the section concerning traps my assertions are validated.

    I apply an old rule to myself because of the seriousness of any trade. If you dont know what you are talking about then hush up and learn from the expert. I've cleaned this addage up a bit out of respect for women. Most Tradesmen speak kinda rough.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •