Results 1 to 1 of 1
  1. #1
    Join Date
    Jan 2008

    Default warm down hot up

    I have a steam boiler system with radiators in a almost 100 year old house. The first floor temp will stay close to the temp on the thermostat but the second floor will get blazing hot. I saw a show where thermostats were installed on individual radiators to "zone" the heat, but this was done on a circulating hot water system. Can I do this on a steam system? Will it solve my problem? If so, where can I find them?
    I also have a radiator that half gets hot but the other half stays cold...any ideas.
    Just wanted to mention that I have had two of the reputable heating companies in my area to my house. Neither had any solutions other than we are going to just have to live with this.
    Last edited by pdugan1185; 01-06-2008 at 10:32 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts