Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Jan 2008

    Question Old cast iron basement sink has a crack

    I have an old double basin cast iron sink in my basement, and use it mostly for my washing machine drain or cleaning up after I paint or do some home repair work. The sink has a hairline crack running up the back wall of one basin of the sink, and this causes some leaking when I run a load of wash. I dont care about the looks of the sink, and dont want to bring in a welder for this. Is there an easy way to seal or calk this crack so I can eliminate those minor leaks without taking this monster of a sink out completely?

    Last edited by loop; 01-01-2008 at 05:14 PM. Reason: misspelling

  2. #2
    Join Date
    Jun 2007
    Fayette County, Ohio

    Default Re: Old cast iron basement sink has a crack

    If the opening is wide enough you might be able to use JB Weld if not sand the finish a little and apply some 5 minute epoxy. Won't look pretty but should do the trick.
    Be sure you live your life, because you are a long time dead.-Scottish Proverb

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts