+ Reply to Thread
Results 1 to 2 of 2

Thread: 11" Rough-in

  1. #1
    Join Date
    May 2008
    Location
    Santa Cruz, CA
    Posts
    14

    Default 11" Rough-in

    I'm replacing old toilet with a new one (ToTo Drake). Specs call for 12" rough-in. The center of drain is 11" from wall, plus 1/4" for tile which will be installed later. Is there enough wiggle room to install this type of toilet. I rate this toilet very high, and would very much like to use it.

  2. #2
    Join Date
    May 2008
    Location
    Santa Cruz, CA
    Posts
    14

    Default Re: 11" Rough-in

    Never mind, answered my own dilemma. Bought a ToTo Drake base at local plumbing store, the one I wanted. Took it home, set it over the bolts and had about 3/4" to spare. Problem solved. Sometimes you have to get in the trenches to get what you want. Thanks for?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •