+ Reply to Thread
Results 1 to 9 of 9

Hybrid View

  1. #1
    Join Date
    Nov 2007
    Posts
    1

    Default painting wall paper

    What if anything do I need to do differnt when painting wall paper?
    Last edited by vchannah; 11-23-2007 at 03:09 PM.

  2. #2
    Join Date
    Aug 2007
    Location
    The deep South
    Posts
    459

    Default Re: painting wall paper

    I have seen it done several times . It always looks like painted wallpaper . Usually a bad idea .

  3. #3
    Join Date
    Aug 2007
    Location
    The Great White North
    Posts
    4,045

    Default Re: painting wall paper

    vchannah... if you want to paint the wallpaper treat it like any other surface to paint. Clean it with TSP first then use a primer and finally the paint. Hopefully it's well secured to the wall.

    Like djohns mentioned it looks like wallpaper painted.

    Cheers.

  4. #4
    Join Date
    Feb 2011
    Location
    Illinois
    Posts
    10

    Default Re: painting wall paper

    I have a 120 yr old house and it is impossilbe to strip the hundreds of feet of wallpaper due to the poor job the guy did. (I think he didn't prep the drywall and in other places, he has already painted over the wallpaper.)

    So I understand that sometimes it seems like the only choice. There are some other threads on here that give recommendations for how to do it. As far as it looking like painted wallpaper, we are going to do a textured look (like a Tuswcan theme) in our house and I am hoping that will help hide imperfections and seams. (Although I will also be putting compound over the seams before priming. You will probably want to do that.)

    Lowe's has a number of different texturized paints on the market right now.

  5. #5
    Join Date
    Feb 2012
    Location
    Tacoma WA
    Posts
    87

    Default Re: painting wall paper

    First, remove it if you can. A little time now will save you many headaches down the road. If you cant, first oil prime the area. Then mud your seams with light coats of topping compound. Texture and paint. Use a light spray texture, you don't want moisture getting into the wallpaper glue and blistering. I have done this many times and have not had a problem yet.

  6. #6
    Join Date
    Aug 2007
    Location
    Portland, Oregon, formerly of Chicago
    Posts
    1,808

    Default Re: painting wall paper

    I would second Tacoma's advice. If at all possible, I would try to get the paper off. It can almost always be removed, but sometimes it is expedient to seal it in.

    I would add that I like to go over the paper with my finger tips first, feeling for lapped seams and loose paper. I sand down the edges and cut out any loose paper I find. I then prime with a non-water soluble primer. I then patch any imperfections, sand and spot prime. Blanking the walls out with white primer also helps highlight any areas that might need additional attention.

    If you use a water based primer, you risk having that moisture reach the paste and causing the paper to start to release. The oil or shellac based primer will be a moisture barrier. The finish coat can then be water based acrylic/latex.

    In a very old house, you might be encountering old fashioned wallpaper which did not come with a vinyl coating, as has been common in the last 30 years or so. This makes it imperative that you put a moisture barrier primer on it. Of course, if that old paper did not have a plastic coating, you could probably have gotten it off in the first place!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •