+ Reply to Thread
Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Nov 2007
    Posts
    3

    Lightbulb Shower Drain Removal

    I'm in the process of removing a stand alone shower that is in my basement. I want to replace the fixtures that are leaking. It appears that I will have to remove the drain ring, and gasket from the PVC drain pipe before I can move the shower stall and have access to the pipes behind the stall. My question is, how to remove the drain cap and gasket?? Do they unscrew or do I have to pry them off with the chance of destroying the PVC drain. Any help would be greatly appreciated!!

    Thanks!!

  2. #2
    Join Date
    Aug 2007
    Posts
    6,480

    Default Re: Shower Drain Removal

    The shower drains I've seen for the last 15 years use a rubber donut forced in around the drain that seals it to the shower floor. This donut is about 2" tall and can be worked out with a screwdriver. The drain covers are usually snap fit in place, some use screws.

    There may be connections other than the "donut" type described above, those I cannot help with.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •