+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2007
    Location
    warner robins,ga
    Posts
    1

    Question Sagging storm door

    Hi.
    I'm new to this board and i'm stumped. We have a pella fullview storm door and it sags about 1/4" on the handle side all screws on the corners of the door are tight,but when I lift up on the handle side I can watch the miter joints on the door move.Any help would be great...thanks

  2. #2
    Join Date
    Jun 2007
    Location
    Chicago, IL
    Posts
    162

    Default Re: Sagging storm door

    Loosen the screws, block up the strike side of the door a little too high, then retighten the screws.
    HTH

    Dave

  3. #3
    Join Date
    Oct 2007
    Posts
    22

    Default Re: Sagging storm door

    I had a similar problem,I worked it just like dave357 suggested and have had no other problems.It was a very easy fix.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •