Re: Garbage Disposal
If it were me, I would put a plug on the GD line so it can be unplugged easily for service. Remove the black wire from the receptacle and nut it to the white wire to the switch (permanently remark the white wire from the switch with a black marker) and a black pig tail to connect to the receptacle, break the jumper between the two brass screws on the receptacle, connect the black wire from the switch to the top brass screw and the pigtail to the bottom brass screw. Plug the GD into the top half of the receptacle. The top half will be controlled by the switch and the bottom half will be always hot. Be sure the electricity is off while working on the circuit . If you don't understand these instructions you should probably get an electrician.
Be sure you live your life, because you are a long time dead.-Scottish Proverb