Results 1 to 3 of 3

Hybrid View

  1. #1
    Join Date
    Nov 2009

    Question must be an easier way...

    While updating our bath, we found one of our GSCI switch J-box to be sunken too far into the wall to just simply replace. It would not be level with the wall at all. Is there an easier way to go about adjusting it, other than to start ripping off wallboard?
    Our house is only 30 yrs old and we are finding shotty craftsmanship (or should I say lack thereof "craft") in the original builder's skills.

  2. #2
    Join Date
    Feb 2009

    Default Re: must be an easier way...

    As long as the box is secure just use an arc ring or extension and longer screws.

  3. #3
    Join Date
    Sep 2009

    Default Re: must be an easier way...

    Ditto, use the extension ring

    Cut it 3 times & it's still to short.
    Inventor of the Miter Master Plus.

    Hidden Content
    Hidden Content

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts