+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2007
    New Jersey

    Default Attaching a banaster to a wall

    I have to attach a level banister end to a wall. The original builder used a nail at the end and drove it into the wall. Lazy shortcut and it's pulled out of the wall. What can I use that will butt the end of the banister to the wall in a more secure manner?
    I'm talking about a short banister on a second floor landing that runs parallel with the floor and butts to the wall.

    Thanks for your help.

    Thanks for nothing. I figured it out myself.
    Last edited by Robert Burns; 11-08-2009 at 05:30 PM.

  2. #2
    Join Date
    Dec 2009
    Winona, MN

    Default Re: Attaching a banaster to a wall

    Glad you were able to figure it out.

    I use a rail bolt kit, but in the case mentioned here, the wall takes the place of the newel post.


    The 302 kit would work fine.

    I prefer to install a half newel to the wall and bolt the rail to that (see photo for half newel). Looks better than a rail bolted to the wall or a rosette.

    I hope to answers some old questions here and bury a few of the threads by the Spam Trolls.



    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	oakiron2.jpg 
Views:	239 
Size:	11.1 KB 
ID:	3043  
    Last edited by basswood; 12-27-2009 at 06:40 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts