Re: Water in Garage?
Yep -- as Sprucey mentioned the pad should be lower creating a barrier between the house and the pad.
Short of tearing things out you might need to cut a drain trough for the water to flow out the garage door. If the pad itself doesn't slope out then the trough waould need to be cut so to create a slope for the water to run. You would start it shallower at the beginning and deeper as you approach and beyond the door.
Or --- perhaps cut a strip out of the pad the entire length --- dig the gravel to provide a slope --- install drain pipe to direct the water out.
I don't believe blocks are the way to go --- they will intially provide a damn but will eventually become saturated and if too close to the home's structure will cause the same issue you currently have.
"" an ounce of perception -- a pound of obscure "