gas usage for each bolier
I have a two story commerical building I am going to install a second bolier to manage the first floor on a seperate system. I have 1" supply line to the place both boliers are located and I do not want to install a second meter and main gas line. Is there a meter I can install on the feed to each bolier to show usage on each bolier to determin usage and bill accordinally. I also could check the validity of the meter itself, these meters are programed by service employees of the gas company, I could validate the numbers. This would be much cheaper than running 70' of gas pipe and a new meter and could invalidate or validate usage of gas. The programmers in the past make a mistake on the settings at my place and a second person came out and reprogramed the meter. The bill was much higher than before.
Which techincian was right the first or the second?
Tags for this Thread