+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2009
    Posts
    1

    Default Replacing Motor on Bandsaw

    I need to replace the 1/2 hp 1725 rpm motor on my old Delta-Milwaukee band saw. Can I put on a 1hp 1725 rpm instead? Thanks!

  2. #2
    Join Date
    Jun 2007
    Location
    Fayette County, Ohio
    Posts
    5,843

    Default Re: Replacing Motor on Bandsaw

    You can if it will fit, but don't over work the saw. The bearings and bushings where designed for a HP motor.
    Jack
    Be sure you live your life, because you are a long time dead.-Scottish Proverb

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •