Hardware Finish Repair
Five years ago I completed a major renovation of my home and replaced all the hardware (faucets, door knobs, drawer pulls, etc.). The new hardware has an oil rubbed bronze finish. The finish has started to rub off a few of the drawer and cabinet pulls (which I use most frequently) thereby exposing a bright brass finish. Do you have any suggestions on how I can repair the finish to match the original finish? If the finish is not a close match I will have to repeat the process for all the hardware in the house. I don't want to do that until and unless it becomes necessary. Thanks. - Steve
Last edited by stephenmpierce; 07-23-2009 at 11:51 AM.