Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2007

    Default Broke Steam Radiator Vent

    Hi, my name's Jason from Stoughton, MA. I tried to remove an original vent from our single-pipe steam radiator. Unfortunately the head of the vent snapped right off, and the pipe of the vent remained screwed into the radiator. How can remove the pipe without damaging anything else?

  2. #2
    Join Date
    Jun 2007
    Fayette County, Ohio

    Default Re: Broke Steam Radiator Vent

    Is there enough pipe left to get onto with a small pipe wrench or pump pliers? If not get a tap size drill for the vent, this will remove most of the pipe and may even grab enough to screw it all the way in. If not run a tap of the proper size and thread count through the hole this will remove the rest of the pipe and allow you to install a new vent.
    Be sure you live your life, because you are a long time dead.-Scottish Proverb

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts