+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2009
    Posts
    1

    Default new grout cracking

    New tile on bathroom floor & shower has hairline cracks & small pin-holes in the grout. The tile work is not complete. I believe the installer used too much adhesive because it oozed up between the tiles and I don't think it was cleaned out before grouting. Could this be the reason for the cracks in the grout? Is removing the grout & regrouting my only alternative? Thanks for any advice.

  2. #2
    Join Date
    Aug 2007
    Posts
    612

    Default Re: new grout cracking

    It could be that or it could be the floor has too much deflection for a tile floor.

    Here is a very good reference site for all things tile related...

    www.johnbridge.com

    Click on the tile advice forums button on the left side of the screen.

  3. #3
    Join Date
    Jun 2009
    Location
    Derry, NH
    Posts
    61

    Default Re: new grout cracking

    Pin holes in the grout could be air bubbles.
    Too wet of a grout I suspect when applied.

    I would sc**** it out. Thin set does occasionally squeeze through during application but should be cleaned out before grouting.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •