Re: Replacement Vanity not as deep - vinyl floor too short
The best thing would be to install new vinyl and maintain a water tight floor covering. Short of that, laying a piece of baseboard on it's side across the bare spot will work, as will a piece of marble. The major problem with this method is that it will be a toe biter. Whatever you use, be sure to caulk the perimeter at the floor to prevent water from getting under it. Also, you won't need to cut the vinyl any further, just lay the strip over the edge of the vinyl so that it aids in holding the raw edge down and provides a more water tight seal.
Originally Posted by msandi
I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!