Troubleshooting a electrical problem with an jet areator motor and switch box?
Noticed red light on circuit breaker box was glowing. checked areator motor and it was not running. pushed bottom and motor came back on. Later light back on again. Would not reset this time. Pulled areator and check with a seperate power cord and motor ran. Female plug seeam bad and replaced. Now testers says there is power at the new plug but motor or any other device will not work. This is an underground cable running from outside wall to Jet areator spectic system. What in the world could be giving me these problems. Red light does not come on and there is power indicated there. Makes No Sense to me why this is happing. Please help as I cant aford to pay anyone to fix this problem.