+ Reply to Thread
Results 1 to 10 of 11

Hybrid View

  1. #1
    Join Date
    Oct 2007
    Posts
    16

    Default Gas fireplace ignition

    I have a gas fireplace with a pilot light. The gas is turned on and off by a light switch on the wall. The switch stopped working and I have replaced it several times with a standard light switch I got at home depot. It works for a little while, and then seems to short out.

    Am I using the wrong kind of switch? Or could there be a problem with the wiring?

    Thanks for your help.

  2. #2
    Join Date
    Jul 2010
    Location
    SoCal
    Posts
    6,530

    Default Re: Gas fireplace ignition

    Your set up resembles the old floor/wall heating systems so many old homes used to have. A simple "heat only" thermostat is all you need to close a circuit that opens a gas valve, and viola - your fireplace comes on with the help of the pilot light.

    Still having problems? call a plumber.

  3. #3
    Join Date
    May 2012
    Posts
    137

    Default Re: Gas fireplace ignition

    There is a name of the manufacturer on the valve body - mine is Rosschild or something like that.

    I am having the same issue with mine, but the Google-searched ****** docs say to take a multimeter and test leads/contacts on the valve body. They even have a diagram of which to check and nominal readings.

  4. #4
    Join Date
    Dec 2013
    Location
    Montreal Canada
    Posts
    190

    Default Re: Gas fireplace ignition

    If you have a standing pilot and the flame goes out i would suggest changing the thermocupol . this will resolve most issues with a standing pilot burner. If this does not work then change the gas valve.

  5. #5
    Join Date
    Jan 2011
    Location
    Columbiana, Alabama
    Posts
    710

    Default Re: Gas fireplace ignition

    I agree with all the responses but what the OP said has me confused.

    Does changing the standard single pole wall switch really fix the problem? The unit load should be very light and the switch should last a lifetime, unless we're talking about a 1.5 HP fan.

    In fact the load my be so small that something like an occupancy sensor may not work.

    BTW if the system works on Butane not Propane it may simply be too cold outside to develop enough vapor pressure to supply the heater.
    Good Luck from Columbiana, Alabama
    Maurice Turgeon, Hidden Content

  6. #6
    Join Date
    Mar 2014
    Location
    104 monmouth way ,Clifton Park, NY 12065
    Posts
    13

    Default Re: Gas fireplace ignition

    I too have doubt on changing only single pole wall switch really fix the problem.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •