+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2014
    Posts
    2

    Default seed square holder

    I would like to find the info needed to build the speed square holder that Tom made in episode (I think?) 2012. He used a PVC baluster, a piece of plywood and a screw. Looked pretty slick!!
    Thanks, Old Shop Teacher

  2. #2
    Join Date
    Aug 2007
    Posts
    7,235

    Default Re: seed square holder

    Just watch the video again and copy what he does.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

  3. #3
    Join Date
    Sep 2014
    Posts
    2

    Default Re: seed square holder

    I can't find where to locate or play the video you mentioned. I'm about as technological with computers, videos, etc as a turnip!!! Even after I find the location for the answer to my question (IF I find it!!), I'm not sure if I will be able to play it. I have tried to use "search" by typing in "2012", "speed square holder", "speed square"... etc and nothin'. Some times I think that I'm too old for this stuff!!!!
    I would appreciate your help!!!!!
    Thanks for your help!!!
    VERY
    "Old Shop Teacher"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •