+ Reply to Thread
Results 1 to 10 of 12

Hybrid View

  1. #1
    Join Date
    Jan 2014
    Posts
    13

    Default Water Heater Installation Cost

    My water heater broke and I bought one from Lowes for $330 and opted for a Lowes contractor to install it for a base installation price of $300.

    The new heater was just a tad shorter than the old one so they had to put in new copper pipes to accommodate it. They also increased the size of the vent to a 4", which I was told was due to code. These were considered upgrades and they ended up charging me an additional $500 to install it. Total install cost: $800.

    My question is, was I ripped off? I watched them the entire time and they weren't exactly performing brain surgery by cutting the copper pipes and soldering them together. It took them about 2 hours to get everything done including bringing in/out their equipment. They made it sound like the job was really complicated when they were asking whether I wanted them to install it or not (meaning opt for the upgrade) I was left to believe it was something intensive. I have no handyman experience at all. If I was not ripped off, why does this cost so much?

    I live in North New Jersey and the contractors were Bogush in Wallington, NJ.



    Last edited by HelloJerry; 02-05-2014 at 10:00 PM.

  2. #2
    Join Date
    Jul 2010
    Location
    SoCal
    Posts
    6,758

    Default Re: Water Heater Installation Cost

    When a water heater is too short, you can either:

    1. Lengthen the supply pipes, as your installers did.

    2. Use flex supply lines, as we do in California. This option still needs additional plumbing and soldering.

    3. Place the new water heater on a stand that you can build from extra materials laying around: 2x4s, bricks, blocks.

    Now let's talk about the charges. $300 basic installation - acceptable for Northern New jersey. $500 for additional upgrades - excessive, even for your area.

    Now, remember that watching the plumbers (?) working is still not a criteria to determine that they don't deserve that much money. A plumber in your area charges up to $125 an hour, so you do the math.

    If you feel that you were ripped off, contact Lowe's and your state contractor's board. You might get a small rebate, or not. Lowe's is acting as a middleman here, but it still supposed to be responsible for their subcontractors' actions.

  3. #3
    Join Date
    Jul 2010
    Location
    SoCal
    Posts
    6,758

    Default Re: Water Heater Installation Cost

    Another thing: Have they installed a 3/4" copper pipe, leading to the floor on the P&T valve? pictures don't show that.

    And one last thing: Don't store any flammable materials near the water heater (gas containers, old paint buckets, chemicals, etc.)

    Keep us informed.

  4. #4
    Join Date
    Jan 2014
    Posts
    13

    Default Re: Water Heater Installation Cost

    Quote Originally Posted by dj1 View Post
    Another thing: Have they installed a 3/4" copper pipe, leading to the floor on the P&T valve? pictures don't show that.
    Yes. Additional pic below.



    Thanks for the info above. I tried calling a 3 plumbers and Home Depot today but no one answered their phone.

  5. #5
    Join Date
    Dec 2013
    Location
    Montreal Canada
    Posts
    218

    Default Re: Water Heater Installation Cost

    the job looks well done in my opinion,When people ask for a quote on a job not seen extras will happen. I would have suggest changing the gas valve, those valves (lubricate Plug) can leak when used and not retightened. There is something that i never saw before is a ground wire from the hot to the cold pipes. Where is this required by code and why I am curious.

  6. #6
    Join Date
    Jul 2010
    Location
    SoCal
    Posts
    6,758

    Default Re: Water Heater Installation Cost

    The T&P valve copper pipe looks fine.

    Tell me, is that a dent on the bottom of the water heater in the latest photo?

  7. #7
    Join Date
    Jan 2014
    Posts
    13

    Default Re: Water Heater Installation Cost

    Quote Originally Posted by bill shack View Post
    the job looks well done in my opinion,When people ask for a quote on a job not seen extras will happen. I would have suggest changing the gas valve, those valves (lubricate Plug) can leak when used and not retightened. There is something that i never saw before is a ground wire from the hot to the cold pipes. Where is this required by code and why I am curious.
    I'm in Nutley, NJ and when the city inspector comes, I'll be sure to ask about the ground wire.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •