+ Reply to Thread
Results 1 to 4 of 4

Thread: Drawings

Hybrid View

  1. #1
    Join Date
    Dec 2007
    Location
    Tennessee
    Posts
    1,713

    Default Drawings

    I have seen posts here with simple drawings on them. Several times I have wanted to do a simple drawing to illustrate a point but I can't figure out how it is done. I have made drawings in the draw module of a word processor and tried to cut and paste it but that didn't work either.

    How do they do it?

  2. #2
    Join Date
    Aug 2007
    Posts
    6,966

    Default Re: Drawings

    You have to save it as a .jpg. It would seem that TOH has disabled the ability to upload images to the server, so you'll have to host with another ****** host, then link it here. JLMcdaniel (a moderator ) can post images for you.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

  3. #3
    Join Date
    Jun 2007
    Location
    Fayette County, Ohio
    Posts
    5,789

    Default Re: Drawings

    I use Paint to make simple drawings, save it as a jpg and upload it to my Photobucket account. I can then the IMG link on here.

    Jack
    Be sure you live your life, because you are a long time dead.-Scottish Proverb

  4. #4
    Join Date
    Dec 2010
    Location
    Houston Texas
    Posts
    2,949

    Default Re: Drawings

    I use a circa 1998 version of MGI Photosuite

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •