+ Reply to Thread
Results 1 to 3 of 3

Threaded View

  1. #1
    Join Date
    Nov 2013
    Posts
    1

    Default Tile small area over original tile

    Hello, please let me start by saying that I am a total beginner with DIY projects. I'm trying a very small tile project for the first time. It's a 25"x50" fireplace hearth that will be flush with our hardwood floor. I started by removing the unwanted tile and discovered a 1/2 thick layer of mortar, which I removed as well. This revealed another layer of tile below. I also prefer to tile over this. But to have my new tile rest flush with the surrounding hardwood, I'm think I need to install 1/2" hardie board over the original tile.... First question: is this the correct way to do this? Second question: what is the best method to adhere it? Mortor? ... Once that is down, I feel good about the instructions for the tile install. Any advise is appreciated. Thank you!!
    Last edited by Tina0112; 11-23-2013 at 08:21 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •