+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2013
    Posts
    1

    Default 7' x 36" original entry door

    I am looking for a new replacement front door with these dimensions. The current (original) door to my 1910 concrete block home is a 3/4 light beveled glass. Very simple and painted on the outside stripped and finished on the inside. I was ready to buy a similar door in smooth fiberglass that I plan to paint. However I have been unable to find one with these dimensions. I can't seem to buy an 8 foot because I can't cut that much off. I was told I could buy a solid fiberglass door and they can put double paned glass in it. I am concerned with the integrity of the door at that point. I only want to do this once. I live in the Midwest. Any suggestions?
    Last edited by Lucia Hamill; 06-13-2013 at 10:22 PM.

  2. #2
    Join Date
    Jun 2007
    Location
    Fayette County, Ohio
    Posts
    5,622

    Default Re: 7' x 36" original entry door

    HomeDpot carries 36 x 84 Masonite fiberglass doors. If they don't have it in stock locally you can order on line and have it delivered to your local store.

    Jack
    Be sure you live your life, because you are a long time dead.-Scottish Proverb

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •